• Kontaktperson
    Kontaktperson
    Logga in för att se kontaktperson
  • Svenska
    Språkval
Standardiserade backsystem

Färdiga för montering, finns i lager och i många storlekar

Standardiserade backsystem

Upptäck vårt sortiment
Centrera remsorna eller placera dem längs ytterkanten

Blockformad bandpositionering, fjädrande E 5654

Centrera remsorna eller placera dem längs ytterkanten

Till produkten
Ställ dina frågor direkt vid produkten från och med nu

Har du frågor om produkten?

Ställ dina frågor direkt vid produkten från och med nu

Utforska produkterna
Formställ
Pressverktyg
Plattor & stänger
Komponenter
Varmkanalsteknik
Verkstadstillbehör
Varmkanalstyrning

Nytt hos Meusburger

New: Compact slide 1:1 E 6100

New: Compact slide 1:1 E 6100

The new slide E 6100 is compact, durable and eliminates shear forces thanks to its V-shaped force application. The hardened insert can be adjusted directly to the customer’s specific contours.
To the product
New: Spacer for die protection E 5307

New: Spacer for die protection E 5307

Ideal for protecting gas springs and active parts during transport and storage in progressive, transfer or stamping dies.
Ytterligare information
New: Pilot pin with parabolic tip E 5651

New: Pilot pin with parabolic tip E 5651

Pilot pins with parabolic tip are now available as part of our existing range of pilot pins.
Ytterligare information
New female cable connector, M8 E 6622 with insulation displacement contact

New female cable connector, M8 E 6622 with insulation displacement contact

The female cable connector E 6622 with insulation displacement contact allows for quick and easy assembly without removing the insulation from individual wires.
To the product
Expansion: Fitting E 2020

Expansion: Fitting E 2020

The shut-off fitting E 2020 in size 9 mm from the EU coupling system is now also available with a G 1/8" thread.
To the product
Additions for cycle counters E 2480 and E 24805

Additions for cycle counters E 2480 and E 24805

We have expanded our range of cycle counters. The cycle counter E 24805 and the cycle counter E 2480 with extension are now also available for left-hand actuation.
To the product
New: Thrust screw, hardened E 5835

New: Thrust screw, hardened E 5835

To absorb the stamping force of a cutting punch, replaces thee hardened punch backing plate. Enables easy removal of the punch, optimal force absorption and direct force application.
To the product
Expansion: Guide bolt for springs E 1562

Expansion: Guide bolt for springs E 1562

The guide bolt E 1562 is now available for standard system compression springs. It prevents the spring from buckling and ensures precise positioning within the die.
To the product
New: Bush with male thread, with collar E 5708

New: Bush with male thread, with collar E 5708

The E 5708 allows easy access to spring-loaded active parts with a collar from the working plane. Thanks to its space-saving design, it can be removed even in confined spaces.
To the product
Faster cable assembly with threaded connections

Faster cable assembly with threaded connections

The female cable connector E 6604 and the male cable connector E 66045 M16 are now also available with threaded connections for time-saving cable assembly.
To the product

Våra backsystem: från lösningar för underskär till passande tillbehör

___REQUIRED___

Upptäck våra varianter av backämnen för formverktygstillverkning

Dra nytta av vårt stora utbud av backämnen lagerförda, DLC-beläggningar för optimal smörjning och jämn gång samt CAD-data med monteringsutrymmen för enkel konstruktion.

Läs mer
___REQUIRED___

Alltid i perfekt position

Med våra backhållare kan du lita på standardiserade och fältbeprövade lösningar för formverktygsbygge. Sortimentet erbjuder en passande modell för ett brett spektrum av utförande.

Till sortimentet
___REQUIRED___

DLC-beläggning kombineras med effektiv kylning

Den exklusiva kompakta backenheten E 3380 möjliggör tillförlitliga backrörelser och lång livslängd även vid krävande tillämpningar.

Till produkten

Den rätta lösningen för varje applikation

Konstruktörer för formverktyg
Formsprutare
Konstruktörer för pressverktyg
Gnistare
Polerare
Meusburger CAD-verktyg

Spännande teman för dig

The Meusburger compact slide 1:1 for maximum compactness and load capacity

The Meusburger compact slide 1:1 for maximum compactness and load capacity

When space is at a premium and precision is key, traditional slide solutions quickly reach their limits. Shear forces, complicated guides and increasing wear make the design unnecessarily complex. This is where the Meusburger compact slide 1:1 E 6100 comes in and takes motion to a new and compact level.
Ytterligare information
Ejectors in focus: Choosing the right material and surface finish

Ejectors in focus: Choosing the right material and surface finish

Ejectors are among the components in an injection mould that are subjected to the greatest load and must meet a variety of requirements. Your choice affects service life, process stability, maintenance requirements and component quality, and should therefore not be based solely on dimensions and cost-related criteria. A variety of materials and surface finishes are used – ranging from cold-work and hot-work steel to DLC coatings in different designs.
Ytterligare information
Standard round bars for precision machine and jig solutions

Standard round bars for precision machine and jig solutions

In mould and die making, high-quality primary material is essential for precise and efficient manufacturing processes. Our round bars offer a particularly practical solution here: pre-hardened primary material that is available directly from stock. In many cases, there is no need for the time-consuming hardening process in-house, which significantly reduces lead times.
Ytterligare information
Make strip guiding more efficient

Make strip guiding more efficient

Standardised components reduce design effort, shorten lead times and lower costs. Find out how you can make your processes more cost-effective with ready-to-use, perfectly coordinated solutions.
Ytterligare information
The foundation for precise and durable injection moulds

The foundation for precise and durable injection moulds

Guides are key components in mould making and have a significant impact on the precision, durability and cost-effectiveness of moulds. Choosing the right guiding system ensures smooth motion sequences, reduces wear, and minimises maintenance and downtimes. Whether classic sliding guides, self-lubricating bushings or high-precision ball guides – a range of solutions is available to suit the specific application.

Ytterligare information
Precise and reliable final centring

Precise and reliable final centring

Precision, quality and interchangeability are key factors when selecting centring units. At Meusburger, you will find round and flat centring units, ready-to-use for reliable final centring of your injection mould.
Ytterligare information
Designs at the click of a button

Designs at the click of a button

A finished design in just a few clicks – that’s what Meusburger solutions stand for. Our wizards, configurators and CAD tools in the portal support you in making your design process fast and more reliable. The intuitive applications make your everyday work easier, shorten lead times and ensure greater efficiency throughout the entire life cycle of your mould or die. Discover for yourself how easy designing can be.
Ytterligare information
smartFLOW Helix – optimal melt flow taken to the next level

smartFLOW Helix – optimal melt flow taken to the next level

In the demanding world of injection moulding, optimal melt flow in the hot runner system is a decisive factor in process stability, part quality and production costs. With smartFLOW Helix, we are setting a new standard for processing demanding plastics – especially in valve gate systems.
Ytterligare information
Temperature regulation for mould making and injection moulding

Temperature regulation for mould making and injection moulding

Efficient temperature regulation systems are a central success factor in modern mould making and injection moulding.
Ytterligare information
The right nozzle for every application

The right nozzle for every application

The Meusburger hot runner nozzles offer the highest precision and reliability in the processing of plastics. Our diverse range contains the right solution for every application.
Ytterligare information

Er tillförlitliga partner för verktygsmakeri och formverktyg

Meusburger är marknadsledande inom området standardkomponenter med hög precision. Kunder över hela världen utnyttjar fördelarna med standardisering och drar nytta av företagets över 60 års erfarenhet av att arbeta med stål. Produktportföljen sträcker sig från standardkomponenter och utvalda verkstadstillbehör via varmkanalsteknik och styrning till ett system för kunskapshantering. Det här gör Meusburger till er tillförlitliga globala partner för tillverkning av formverktyg, pressverktyg, jiggar och fixturer.

Om oss
Luftaufnahme des

Shopval

Formverktygsbygge
Formverktygsbygge
Stanna här Tillbaka till den gamla versionen
Pressverktygsbygge
Pressverktygsbygge
Stanna här Tillbaka till den gamla versionen
Maskin- och fixturbygge
Maskin- och fixturbygge
Stanna här Tillbaka till den gamla versionen

Förhandsgranskning varukorg

CAD-förhandsgranskning

Din varukorg är tom.
Totalt netto
Till varukorgen
Loading the configurator is taking longer than expected
Please check your internet connection and try again

Viktig information

Du vill konfigurera en artikel som tillhör . Efter att du har gjort dina justeringar, kontrollera oberoende av alla plattor och komponenter för teknisk kompatibilitet.