Contact

Vă stăm la dispoziție personal cu cea mai mare plăcere de luni până vineri între orele 8:00 și 17:00. Pe acest link ve-ți regăsi persoana de contact din regiunea dumneavoastră.

Centrala Wolfurt
+43 5574 6706-0

Persoana dvs. de contact

SHOP

Coş de cumpărături {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Articol Schimbare coș cumpărături

Observație

Poză

Articol

Buc

Preț unitar

Preț total

Preț total incl. reducere

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

Vă rugăm să vă logați pentru a vedea prețurile și pentru a continua comanda.

Comunicate de presă pe tema firmei noastre

Sunteți interesați de firma și produsele noastre? Atunci sunteți la locul potrivit.

Single nozzle easyFILL EH 4010

12.01.2024, Mould making

Meusburger has expanded its product range to include the single nozzle easyFILL EH 4010 for selected applications. It has been developed as a cost-effective alternative to the single nozzle smartFILL EH 4000 and is available with two flow channel diameters and in four lengths respectively.

Cost-effective alternative

The nozzle features a modular design and uses many components from the existing smartFILL nozzle series. The combination with new, cost-effective components has led to considerable cost savings. The one-piece, coated nozzle tip allows problem-free processing of most plastics, including technical ones. There are only restrictions for filled plastics. The single nozzle easyFILL is heated with just one control zone. The heat output distribution in the nozzle heater was adapted accordingly so that a second heater in the area of the nozzle housing and the sprue bush is not necessary. Different nozzle heads and contact radii in the sprue bush allow an individual selection of the nozzle to suit the injection situation on the item or in the mould and the connection to the machine nozzle.

Continuous availability

The single nozzle easyFILL can be selected and ordered around the clock in the Meusburger shop. Once the nozzle has been selected, the corresponding 3D CAD data including the installation space can be downloaded immediately. A large number of possible file formats are available for this purpose. The nozzle is then delivered within just two working days. The modular design of the nozzle allows individual nozzle components to be replaced at any time, so that repairs are efficient and economical.