Carrello acquisti {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Articoli Cambia carrello acquisti
Nota
| Foto | Articoli | Pz. | Prezzo singolo | Prezzo unitario | Prezzo unitario incluso lo sconto | |
|---|---|---|---|---|---|---|
|
|
{{warenkorbItem.produktgruppe.produktname}}{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}
{{attributwertEingabe.attributBezeichnung}}
|
|||||
{{hannexItem.Benennung}}{{hannexItem.Bezeichnung}} |
La nostra vasta gamma permette di trovare il materiale idoneo per quasi tutte le applicazioni.
1.2344 / 1.2344 ESU Hot-work steel
Designation
| DIN: | X 40 CrMoV 5-1 |
| AFNOR: | Z 40 CDV 5 |
| UNI: | X 40 CrMoV 5-1 KU |
| AISI: | H13 / H13 ESR |
Chemical composition:
| C | 0.40 |
| Si | 1.00 |
| Cr | 5.30 |
| Mo | 1.40 |
| V | 1.00 |
STRENGTH:
max. 230 HB
(≈ max. 780 N/mm²)
Thermal conductivity at 100 °C: 26 W/m K
Character:
high-alloy hot-work steel, high heat resistance, high wear resistance, good toughness, thermal conductivity and hot cracks resistance, limited use for water cooling; for very high requirements available in grade *ESR (Electro-Slag Remelted)
Application:
standard material for hot-work tools, extrusion moulds, dies, tools for plastic processing
Treatment by
Polishing, etching, EDM, nitriding » is possible
Hard chroming » in special cases
Heat treatment:
Soft annealing:
750 to 800 °C for about 4 to 5 hours; slow controlled cooling of 10 to 20 °C per hour to about 600 °C; further cooling in air, max. 230 HB
Hardening:
1020 to 1060 °C
15 to 30 minutes keeping curing temperature
quenching in water/oil
obtainable hardness: 54 HRC
Tempering:
slow heating to tempering temperature immediately after hardening; minimum time in furnace: 1 hour per 20 mm part thickness
Technical tip:
- susceptible to corrosion; during machining, continuous corrosion protection has to be ensured (especially during wire EDM)
- 1.2344 ESRH is very suitable for mirror polishing
1.2344 Available in the web shop as:
Standard bars
NR-Round bars1.2344 ESR Available in the web shop as:
Data sheet 1.2344 (ESR)
Depliant qualità di materiali
Poster qualità di materiali
© 2022 by Meusburger Georg GmbH & Co KG | All rights reserved
Česká republika [CS]
Danmark [DA]
Deutschland [DE]
España [ES]
France [FR]
India [EN]
Italia [IT]
Magyarország [HU]
México [ES]
Nederland [NL]
Österreich [DE]
Polska [PL]
Portugal [PT]
România [RO]
Schweiz [DE]
Slovenija [SL]
Srbija [SR]
Suomi [FI]
Sverige [SV]
Türkiye [TR]
United Kingdom [EN]
USA [EN]
Ελλάδα [EL]
България [BG]
Росси́я [RU]
华 [ZH]