Innovative bending unit for optimal results

The surface quality achieved with bending operations is often rather poor due to the sliding friction between the die and the metal strip. As a result additional processing steps must be carried out leading to higher costs and longer lead times.

With the E 5690 Bending unit TRIBMATE® EASY ROLLA™, rolling friction occurs between the bending unit and the sheet metal strip which leads to significantly better surface quality in the bending area and high-quality forming results even with soft, coated and lacquered materials. An additional advantage is the freely rotatable bearing roller which enables an unlimited stroke. The bending unit is available from stock in diameters 3-10 mm and in lengths 25-100 mm, whereby the length can be easily shortened to the desired size simply by means of wire EDM. The bending unit can be perfectly combined with the E 5692 Bending insert TRIBMATE® GRIPPA™.

Further information To the product

E 5690 TRIBMATE® EASY ROLLA™

E 5692 TRIBMATE® GRIPPA™

E 5690 bending unit TRIBMATE® EASY ROLLA™ - mount retaining clip

To the news overview