Kontakt

Vi står til rådighed mandag til fredag fra kl. 8:00 til kl. 17:00. Via dette link kan du finde din kontaktperson for dit område.

Central Wolfurt
+43 5574 6706-0

Din kontaktperson

SHOP

Kurv {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Produkt Skift indkøbskurv

Bemærkning

Billede

Produkt

Stk.

Enkeltpris

Samlet pris

Samlet pris inkl. rabat

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

Log ind for at se dine priser og fortsæt bestillingen.

Speed Lap set

V 76860

Produktbeskrivelse

Inkluderer alle former af Speed Lap systemet
Hård diamantpastaholder til Lapping
Leveres i en praktisk plastæske

E Information about the Meusburger Speed Lap system on page

Produktvalg

Produktinformationer

Produktanbefalinger

Produktvalg

		Sæt	Nr.	Pris / stk.	Mængde
		V 76862/4x 4/140 - 1 pc V 76862/6x10/140 - 1 pc V 76862/8x 8/140 - 1 pc V 76863/3/ 50 - 2 pcs V 76863/5/140 - 1 pc V 76863/8/140 - 1 pc V 76866/V1/4 - 5 pcs V 76866/V1/5 - 5 pcs V 76866/V1/6 - 5 pcs V 76866/V1/8 - 5 pcs V 76866/R1/4 - 5 pcs V 76866/R1/5 - 5 pcs V 76866/R1/6 - 5 pcs V 76866/R1/8 - 5 pcs V 76866/D1/6 - 5 pcs V 76866/D1/8 - 5 pcs V 76868/2,5 - 1 pc V 76868/3,3 - 1 pc	V 76860/Set	193,00 €

Produktinformationer

Tekniktips

E The Meusburger Speed Lap System

The speed lap system comprises of pads and bars for applying diamond compounds in order to obtain high surface quality while saving time.

New composite material
Prevents the washing out of soft constituents and the formation of built-up edges
Higher material removal rate (compared to other lapping techniques)
Less sensitive to pressure
Enables consistent, scratch-free lapping
Sturdy lapping bars

Technical information

Preparing the lapping pads:
Before using the lapping pads for the ﬁrst time, use a ﬁne abrasive paper or diamond foil to hone them.
Preparing the lapping bars:
Adjust the lapping bars to the shape of the surface on which you are going to use them; this can be done with sanding discs, abrasive paper or ﬁles. You can use a collet to hold circular lapping bars.
Grit:
The optimum grit size is 6 μm but you can also use a coarser grain structure. If required, you can lap to 3 μm.
Lubrication:
You can use VLM 5 Cutting ﬂuid or VLM 20 Polishing oil for thinning the diamond compound.
Pressure:
For 60–70% of this work step, apply light pressure; for the rest of the time, that is: for ﬁnishing, do not apply any pressure.
Hand-filing machine:
Speed: 4.000-7.000 min^-1
Stroke length: 0.5-1.0 mm