Alışveriş sepeti {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Ürünler Alışveriş sepetini değiştir
Açıklama
| Resim | Ürünler | Adet | Adet fiyatı | Toplam fiyatı | İskonto dahil toplam fiyatı | |
|---|---|---|---|---|---|---|
|
|
{{warenkorbItem.produktgruppe.produktname}}{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}
{{attributwertEingabe.attributBezeichnung}}
|
|||||
{{hannexItem.Benennung}}{{hannexItem.Bezeichnung}} |
Her uygulama için doğru malzemeyi bulabilirsiniz.
1.2738 TSHH steel for plastic moulds
DESIGNATION:
| DIN: | Special alloy |
| AFNOR: | – |
| UNI: | – |
| AISI: | – |
INDICATORY ANALYSIS:
| C | 0.26 |
| Mn | 1.45 |
| Cr | 1.25 |
| Mo | 0.50 |
| Ni | 1.05 |
| V | 0.12 |
STRENGH:
33 - 38 HRC
(≈ 1050 - 1200 N/mm²)
THERMAL CONDUCTIVITY AT 250°C:
41.3W/m K
CHARACTER:
Modified, pre-toughened steel for plastic moulds, which is characterised by good polishability and optimal grainability; high thermal conductivity and wear resistance
APPLICATION:
Cavity plates without dimension restrictions, with deep cavities and high core loads
TREATMENT BY:
Polishing, etching, EDM, nitriding:
highly suitable
Hard chrome plating:
is possible
HEAT TREATMENT:
Already pre-toughened; usually no heat treatment required
Soft annealing:
720°C 1 hour per 25 mm part thickness
slow controlled cooling inside the furnace
max. 245 HB
Hardening:
880 °C
keep curing temperature for 15 to 30 minutes
cooling in hot bath/oil/compressed gas
obtainable hardness: 50 HRC
Tempering:
slow heating to tempering temperature immediately after hardening;
minimum time in furnace: 1 hour per 25 mm part thickness
TEMPERING CHART:
TECHNICAL TIP:
- uniform hardness over the entire cross section
- improved weldability
- higher toughness than 1.2738
Available in the web shop as:
P-Standard plates
P-Special platesData sheet 1.2738 TSHH
Material grades brochure
Material grades poster
© 2022 by Meusburger Georg GmbH & Co KG | All rights reserved
Česká republika [CS]
Danmark [DA]
Deutschland [DE]
España [ES]
France [FR]
India [EN]
Italia [IT]
Magyarország [HU]
México [ES]
Nederland [NL]
Österreich [DE]
Polska [PL]
Portugal [PT]
România [RO]
Schweiz [DE]
Slovenija [SL]
Srbija [SR]
Suomi [FI]
Sverige [SV]
Türkiye [TR]
United Kingdom [EN]
USA [EN]
Ελλάδα [EL]
България [BG]
Росси́я [RU]
华 [ZH]