Kontakt

Za Vas smo dostupni od ponedeljka do petka od 8:00 do 17:00 časova. Preko ovog linka možete pronaći kontakt osobe za Vaš region.

Sedište u Wolfurtu
+43 5574 6706-0

Vaše kontakt osobe

SHOP

Korpa {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Artikal Izmena pregleda korpe

Primedba

Slika

Artikal

kom.

Cena za jedan komad

Ukupna cena

Ukupna cena uklj. popust

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

: Prijavite se da biste videli svoje cene i nastavili da naručujete.

Potpuno sintetička mast, upotrebljiva do 300 °C (nije hemijski reaktivna)

VGI 300

Opis proizvoda

Solid-free high-temperature grease for lubricating ejectors, slides and ejection units in tools and moulds that require tight tolerances.

Prednosti

Usable up to 300 °C
High shot rate without having to relubricate
Suitable for tight tolerances
Usable on visible parts (no grease transport by ejectors)
H1 registrovano

Molimo preuzmite bezbednosni list ovde.

Izbor proizvoda

Informacije o proizvodima

Preporuke za proizvod

Izbor proizvoda

		Pakovanje	Sadržaj	Kom. / pakovanju pce.	Br.	Cena / komad	Količina
		Kantica	20g	1	VGI 300/ 20	35,20 €
		Kantica	200g	1	VGI 300/ 200	222,00 €

Informacije o proizvodima

Primena

Make sure that the designated area is clean and not contaminated by oil or grease residues, hand perspiration, dirt particles, etc. For cleaning, the use of VCM 20 is recommended. Apply the grease thinly and evenly. Do not mix with other lubricants!

Karakteristike

VGI 300	Cena	Metode ispitivanja
Boja	white-transparent	DIN ISO 2049
Maksimalna temperatura	300 °C
Gustina	1,84 g/cm³	DIN 51 757
Osnovno ulje	PFPE
Drop point	none	DIN ISO 2176
Thickener	inorganic
NLGI-class	2-3	DIN 51818
Worked penetration	240-275 1/10mm	DIN 51818

Tehnički saveti

What does ‘H1 registered ’ mean?

These consumables are approved for the food processing industry. H1 means that occasional, technically incidental contact (10 parts per million pieces) with food is permitted.