Kontakt

Za Vas smo dostupni od ponedeljka do petka od 8:00 do 17:00 časova. Preko ovog linka možete pronaći kontakt osobe za Vaš region.

Sedište u Wolfurtu
+43 5574 6706-0

Vaše kontakt osobe

Korpa {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Artikal   Izmena pregleda korpe

Primedba

Slika Artikal kom. Cena za jedan komad Ukupna cena Ukupna cena uklj. popust
{{warenkorbItem.produktgruppe.produktname}}

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

     
{{hannexItem.Benennung}}

{{hannexItem.Bezeichnung}}

     

:  Prijavite se da biste videli svoje cene i nastavili da naručujete.

Lowering tension

In our selected range you can find the right material for virtually any application.

1.7225 Steel for quenching and tempering

Designation

DIN:42 CrMo 4 
AFNOR:42 CD 4
UNI:42 CrMo 4
AISI:4140

Chemical composition:

C0.42
Si0.25
Mn0.75
S<0.035
Cr
1.10
Mo
0.22

Strength:

max. 217 HB
(≈ max. 740 N/mm²)

Tensile strength:

heat treated max. 720 N/mm²

Thermal conductivity at 20 °C:

42.6 W/m K


Character:

alloyedsteel, suitable for quenching and tempering, steel with high resistance and high toughness;
universally usable in engineering

Application:

machine construction, base plates, axes, gear shafts, gear wheels


Treatment by

is possible:
Nitriding, EDM, coating

unusual:

Welding


Heat treatment:

Normalising:
840 to 880 °C afterwards cooling in air; some components need tempering afterwards

Soft annealing:
680 to 720 °C for about 2 to 5 hours; slow controlled cooling of 10 to 20 °C per hour to about 600 °C; further cooling in air. Maximum 217 HB

Quenching:
max. 1.600 N/mm²

Hardening:
820 - 880 °C
quenching in oil or water
oil hardening for thin and complex,
water hardening for large and simple components
obtainable hardness: 53-61 HRC


Tempering:

slow heating to tempering temperature (to avoid forming of cracks) immediately after hardening; at least 60 minutes cooling in air

Annealing graph:

To the mould making overview To the die making overview

Available in the web shop as:
Data sheet 1.7225

Otvori PDF

Material grades brochure

Material grades brochure

Material grades poster

Material grades poster

Pošlji

Da li imate otvoren nalog?

Ukoliko imate pristupne podatke za Meusburger portal, prijavite se ovde:

Izgubljena lozinka?

Novogenerisana lozinka je poslata i trebalo bi uskoro da se pojavi u vašem prijemnom sandučetu. Želimo vam uspešan dan.

Unesite Vašu e-mail adresu.
Poslaćemo Vam novu lozinku.

Kategorije proizvoda

Izaberite zemlju

Lokacije

Try our new version of 'My account'

Get familiar with our new ‘My account’ section and benefit from numerous advantages.

Now the new ‘My account’ also gives you a direct insight into the next level of the Meusburger portal. Check out all the information and benefits of the portal here.

Get familiar with our new ‘My account’ section and benefit from numerous advantages.

Now the new ‘My account’ also gives you a direct insight into the next level of the Meusburger portal. Check out all the information and benefits of the portal here.

Keep selection
Beta
New version
Current version