Contact

Vă stăm la dispoziție personal cu cea mai mare plăcere de luni până vineri între orele 8:00 și 17:00. Pe acest link ve-ți regăsi persoana de contact din regiunea dumneavoastră.

Centrala Wolfurt
+43 5574 6706-0

Persoana dvs. de contact

SHOP

Coş de cumpărături {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Articol Schimbare coș cumpărături

Observație

Poză

Articol

Buc

Preț unitar

Preț total

Preț total incl. reducere

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

Vă rugăm să vă logați pentru a vedea prețurile și pentru a continua comanda.

Comunicate de presă pe tema firmei noastre

Sunteți interesați de firma și produsele noastre? Atunci sunteți la locul potrivit.

Leakage problems at high temperatures?

13.09.2018, Mould making

Increasing with high temperatures, leakage problems can occur at various points. Sooner or later, the typical brass plugs can lead to leaks – this results in machine downtimes and increased maintenance intervals. It is often assumed that the problem is the sealant used, but this is usually not the reason: Due to different coefficients of expansion of brass plugs and steel plates, setting occurs during heating and cooling of the mould which consequently leads to leakage.

For this reason, Meusburger has added screw plugs made of steel and stainless steel to its range (E 20767 and E 20749), to guarantee safe sealing even at high temperatures. In addition, baffles are now available in stainless steel as E 21019.

Leakage problems can also occur during temperature regulation with hot water and the use of conventional FKM/Viton® O-ring seals. Standard FKM/Viton® O-ring seals are only suitable to a limited extent over 100°C and the service life lessens significantly with the increasing temperature. The O-ring seals then become hard and leaky. For hot water applications Meusburger now offers E 21311 High temperature O-ring seals in FKM plus material. These can be used for water temperatures up to 180°C and are immediately available from stock.