3.4365 Aluminium - zinc alloy at Meusburger

Магазин

Кошница {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Артикула Смяна на кошницата

Забележка

Снимка

Артикула

Брой

Единична цена

Обща цена

Обща цена с намалението

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

Влезте в регистрацията си, за да видите актуалните цени и да задвижите поръчката.

3.4365 Aluminium - zinc alloy

Designation

DIN:	AlZnMgCu 1.5 / EN AW - 7075
AFNOR:	A - Z5GU
UNI:	9007 / 2
AISI:	-

Chemical composition:

Si	0.40
Fe	0.50
Cu	1.20-2.00
Mn	0.30
Mg	2.10-2.90
Cr	0.18-0.28
Zn	5.10-6.10
Ti	0.20

Delivery condition:

T651 - Solution annealed, stress relieved by controlled stretching and artificially aged.

Strength:

max. 158 HB
(≈ max. 540 N/mm²)

Thermal conductivity at 100 °C:

130-160 W/m K

Character:

hardened, high-strength aluminium zinc alloy with good properties
for structure-etching, as well as good machinability, EDM and polishing properties
Density: 2.8 kg/dm³
Coefficient of thermal expansion: 23.4 10-6 m/mK
Maximum temperature, permanent/short term: 90/120 °C

Application:

plates for mould bases and die sets with increased requirements on
strength; components for machine and jig construction

Treatment by

good suitability
Polishing, machining, EDM

Etching:
Suitable for structure-etching

Repair welding:
not suitable for welding

Heat treatment:

Note: Subsequent heat treatment may lead to
a deterioration of the mechanical properties!

To the mould making overview To the die making overview

Available in the web shop as:

Контакт

{{warenkorbItem.produktgruppe.produktname}}

{{hannexItem.Benennung}}