Контакт

От понеделник до петък от 8:00 до 17:00 часа ние сме на Ваше разположение. На тази линк ще намерите лицата за контакт за вашия регион.

Централата Волфурт
+43 5574 6706-0

Вашето лице за контакти

Кошница {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Артикула   Смяна на кошницата

Забележка

Снимка Артикула Брой Единична цена Обща цена Обща цена с намалението
{{warenkorbItem.produktgruppe.produktname}}

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

     
{{hannexItem.Benennung}}

{{hannexItem.Bezeichnung}}

     

Влезте в регистрацията си, за да видите актуалните цени и да задвижите поръчката.

Marking stamps for optimum parts identification

Marking stamps are used to clearly identify injection moulded parts. Using this technology, different information can be imprinted on the plastic parts.

Components

Depending on the conditions in the mould, different types of marking stamps are used. In addition, you also have the option to choose special types. Discover our comprehensive range.

To the products Overview of marking stamps

Standard marking stamps, long

  • Available as variants with and without height adjustment of the arrow insert (with fixed height)
  • Quick and easy operation from the split line face
  • Many diameters and marking variants available
  • Can be screwed from the back side
  • Matching arrow insert: E 2410

Our tip for thin-walled parts – Stamps with fixed height

Stamps with fixed height are particularly suitable for the marking of thin-walled and technically sophisticated parts.

  • Prevent the forming of an unwanted step between the arrow insert and the main body
  • Installation and removal from the split line face possible thanks to wrench socket in the base body
Installation
E 240x

E 2400

E 240x5

E 24005

Standard marking stamps, short

Due to their low height, the space-saving short stamps are particularly suitable for use in thin cavity plates.

They are pressed directly into the insert and can also be glued in place if necessary. Do not press the arrow insert when installing. This should either be removed or inserted into a suitable installation sleeve before installation.

  • Quick and easy operation from the split line face
  • Many diameter and marking variants are available
  • Matching arrow insert: E 2430


Installation

E 2420

Marking stamps with latching function

The arrow insert latches into defined positions. This has the advantage that even at high injection pressures, the arrow insert cannot rotate automatically.

  • Fixed arrow position through the latching of the arrow insert
  • Can be used at temperatures up to 340 °C
  • With fixed height
  • Easy installation and removal from the split line face


Short version

The stamp is pressed directly into the insert and can be removed from the split line face using a screw.

E 2420 R

Installation

Do not press the arrow insert when installing. This should either be removed or inserted into a suitable installation sleeve.

Removal

Easy removal from the split line face with the withdrawal thread in the main body of the stamp.

To the video instructions


Long version

Installation and removal from the split line face possible thanks to hexagon socket in the base body. The marking stamps can be changed directly on the injection moulding machine.

E 24005 R E 24045 R

Installation

To the video instructions

Multi-stamp

Mark your components with month and year numbers using a single stamp. Thanks to six year dates on this stamp, you save changing the arrow insert at the turn of the year.

  • Time saving when setting month and year on only one stamp
  • Fixed arrow position through the latching of the arrow insert with fixed height

E 2420 MR

Setting

  • Set the year: Turn to the right
  • Set the month: Turn to the left
Installation

Labelling stamps

  • Pressed or glued directly into the insert
  • Marking with CE, food safety and recycling symbols
  • Labelling stamp with recycling code for 6 different types of plastic in accordance with DIN 6120

E 2460 E 2465

Marking stamps, markable

Especially in the die casting area, we offer marking stamps made of hot-work steel 1.2343 for customised marking.

  • Fixed year marking with custom month marking
  • Best suited for die casting moulds thanks to hot-work steel 1.2343 with hardness 45 HRC

E 24760

You might find these topics and products interesting

Вход

Вие вече наш клиент ли сте?

Когато получите данните за достъп към портала на Meusburger, логнете се моля тук:

Забравена парола?

Ново генерираната парола е вече на път и би трябвало в кратко време да пристигне в електронната Ви поща. Желаем Ви един много успешен ден.

Моля, въведете Вашия имейл адрес.
Ние ще Ви изпратим една нова парола.

Изберете държавата в която се намирате

Местоположение

Try our new version of 'My account'

Get familiar with our new ‘My account’ section and benefit from numerous advantages.

Now the new ‘My account’ also gives you a direct insight into the next level of the Meusburger portal. Check out all the information and benefits of the portal here.

Get familiar with our new ‘My account’ section and benefit from numerous advantages.

Now the new ‘My account’ also gives you a direct insight into the next level of the Meusburger portal. Check out all the information and benefits of the portal here.

Keep selection
Beta
New version
Current version